Changchun New Industries Optoelectronics Technology Co., Ltd.
Model No.: MRL-FN-671
Standard Component: Standard Component
Operating Mode: CW
Output Power (mW): 1-1000
Power Stability (rms, Over 4 Hours): <1%, <2%, <3%
Transverse Mode: TEM00 Or Near TEM00
Central Wavelength (nm): 671±1
Beam Height From Base Plate (mm): 27.4
Expected Lifetime (hours): 10000
Warranty: 1 Year
Pointing Stability After Warm-up (mrad): <0.05
Polarization Ratio: >100:1 Horizontal±5 Degree (Vertical Optional)
Packaging: Static free plastic bag and carton, Protective packing
Place of Origin: China (Mainland)
Supply Ability: 500
Certificate: ISO9001 FDA CE Rohs
HS Code: 9013200099
1w 671nm solid Red Laser is especially designed for measurement, spectrum analysis, and scientific research etc. The manual power control knob built on power driver and LED Indicator shows Laser Diode working current data. Besides, the TTL and Analog modulation are built upon request, 2kHz Standard Frequency.
The wide voltage range from 90V to 264V AC and the power Consumption less than 30W per hour. The Operating Tempearure at 10 to 35 degrees C. This model is coming with 1 Year Warranty. For its appearance, it is classic model built in TEC and cooling fans so it gives highly stable Laser output. The laser power stabitliy is measured over 4 hours continusly.
Output power (mW)
Power stability (rms, over 4 hours)
<1%, <2%, <3%
Transverse mode TEM00
Beam diameter at the aperture (1/e2, mm)
Warm-up time (minutes)
Beam divergence, full angle (mrad)
<1.5 Polarization ratio > 100:1 Horizontal±5 degree (Vertical Optional)
Beam height from base plate (mm)
27.4 Operating temperature (℃)
Pointing stability after warm-up (mrad)
Power supply (90-264VAC)
TTL on/off, 1Hz-1KHz, 1KHz-10KHz, 10KHz-30KHz; and Analog modulation option
Expected lifetime (hours)
Changchun New Industries (CNI) founded in 1996, located in Changchun, CHINA, is a leading manufacturer of solid-state and Diode Laser systems. Our products include Green Laser, Blue Laser , Yellow Laser, red laser, RGB laser, Infrared Laser, UV Laser , Single Longitudinal Mode Laser and Q-switched Laser systems. CNI lasers are featured with high performance, low cost and excellent laser beam quality, which are specifically designed for OEM, scientific, industrial and instrumentation use. In addition, CNI lasers are ISO-9001, FDA, CE and JQA certified.
TNT UPS FEDEX DHL
For 1 year
Copyright © 2019 Changchun New Industries Optoelectronics Technology Co., Ltd. All rights reserved.