Changchun New Industries Optoelectronics Technology Co., Ltd.
Model No.: MLL-S-532
Standard Component: Standard Component
Expected Lifetime (hours): 10000
Warranty: 1 Year
Polarization Ratio: >100:1 Vertical±5 Degree
Beam Divergence, Full Angle (mrad): <1.5
Operating Temperature (℃): 10~40
Beam Diameter At The Aperture: 0.70±0.05
Output Power (mW): 1-300
Wavelength (nm): 532±1
Beam Height From Base Plate (mm): 19
Power Stability (rms, Over 4 Hours): 1-3% Optional
Packaging: Static free plastic bag and carton, Protective packing
Place of Origin: China (Mainland)
Supply Ability: 500
Certificate: ISO9001 FDA CE Rohs
HS Code: 9013200099
532nm 300mw solid Low Noise Laser features with ultra compact, small size, wide operating temperature, good sealing, long lifetime, cost -effectiveness and easy operating, working under the pressure of 0.02kPa, which is widely used in DNA sequencing, flow cytometry, cell sorting, optical instrument, spectrum analysis, interference, measurement, holography, Laser printing, chip inspection, physics experiment, etc.The power stability (over 4 hours) is <1%, <2% , <3% optional. The transverse mode is TEM00 and the beam diameter at the aperture is nearly 1.5mm. The beam height from base plate is nearly 19 mm. The warm-up time is less than 10 minutes and the M2 factor is less than 1.2. Otherwise, the warranty is within one year and the working temperature is between 0-60 and 10-35℃ optional. The expected liftime is about 10000 hours.
Output power (mW)
>200, -, 300
Power stability (rms, over 4 hours)
Operating temperature (℃ )
Max. Heat Dissipation of Head(W)
4W@25℃ Central wavelength (nm)
Beam diameter at the aperture( 1/e2 ,mm)
Beam divergence, full angle (mrad)
>100:1 Horizontal±5 degree (Vertical Optional)
Pointing stability after warm-up (mrad)
Pointing stability Over Temp. (µrad/°C)
Noise of amplitude (rms, 20Hz~20MHz)
Warm-up time (minutes) <5
Beam height from base plate (mm)
7g laterally,15g vertically
TTL on/off, 1Hz-1KHz, 1KHz-10KHz, 10KHz-30KHz; and Analog modulation
Expected lifetime (hours)
Changchun New Industries (CNI) founded in 1996, located in Changchun, CHINA, is a leading manufacturer of solid-state and Diode Laser systems. Our products include Green Laser, Blue Laser, Yellow Laser, Red Laser , RGB laser, Infrared Laser, UV Laser , Single Longitudinal Mode Laser and Q-switched Laser systems. CNI lasers are featured with high performance, low cost and excellent laser beam quality, which are specifically designed for OEM, scientific, industrial and instrumentation use. In addition, CNI lasers are ISO-9001, FDA, CE and JQA certified.
1. What about the delivery?
TNT UPS FEDEX DHL
2. What about the warranty?
For 1 year
3.How to pay?
T/T Western Union
Copyright © 2019 Changchun New Industries Optoelectronics Technology Co., Ltd. All rights reserved.